Clear Spot 4G+ Betriebsanweisung Seite 94

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 136
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 93
Clear Spot 4G+ User Guide
94 2131352
UPnP (Universal Plug and Play)
UPnP provides simple and robust connectivity among consumer electronics,
intelligent appliances, and mobile devices from many different vendors. For more
information, see www.upnp.org.
Note: If UPnP is enabled, there are potential security risks.
Enabling UPnP
Before you can use UpnP, you must enable it.
1. Log in to the home page.
2. Click
Advanced settings ().
3. Click
Router > Basic.
4. Next to
UPnP, select Enable.
SPI (Stateful Packet Inspection)
SPI, also known as "dynamic packet filtering," helps to prevent cyberattacks by
validating that the traffic passing through a session conforms to the protocol used
for this type of session. Packets that are not conforming get rejected.
Enabling SPI
Before you can use SPI, you must enable it.
1. Log in to the home page.
2. Click
Advanced settings ().
3. Click
Router > Basic.
4. Next to
SPI, select Enable.
LAN Panel
1. Log in to the home page.
2. Click
Advanced settings ().
3. Click
Router > LAN.
From this window, you can view and adjust settings, or perform the following
actions:
Router IP Address (on the LAN).
Subnet Mask
The routing hardware's internal LAN subnet mask.
Hostname (Device name). See "Host Name (Device Name)" on page 90 and
"Displaying the Home Page of the Device" on page 46.
SSID (Wi-Fi network name). See "SSID (Wi-Fi Network Name)" on page 84.
Link SSID and Hostname. See "Linking the SSID and the Host Name" on
page 85.
Seitenansicht 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 135 136

Kommentare zu diesen Handbüchern

Keine Kommentare